
Kedar Sathaye
Product Manager, Light & Display, Konica Minolta
Kedar Sathaye spoke at MicroLED Connect in 2024 and 2026, representing Konica Minolta.
Virtual Demura for AR/VR Displays: A Near-Eye Case Study
Talk · 17 September 2026
→ See the MicroLED Connect & AR/VR Connect 2026 agenda
Virtual demura, measuring display non-uniformity and correcting it in software, is well established for flat-panel displays. Near-eye systems complicate this approach because the measured image includes not only the emitter, but also the optical path, eye position, measurement geometry, and platform-level image processing. This talk presents a case study on a commercially available near-eye platform: measuring eyebox non-uniformity with an imaging colorimeter, deriving a correction map, and applying it through the platform's image chain. Results are presented as found, including limitations and unexpected behavior, with discussion of image handling, optically induced non-uniformity, and practical measurement geometry. The talk concludes by examining which lessons transfer to microLED waveguide AR: separating the non-uniformity that can be corrected at the display from the position-dependent components that cannot, what this requires in eyebox sampling and measurement practice, and how near-eye demura must account for both the display source and the optical system.
▶ Watch video highlights from this talk
- ▶ If microLED pixels range from 2 to 10 million candelas per m², what does that do to the final image?
- ▶ Why does demura need a feedback loop of sequential dot-matrix patterns instead of one camera measurement?
- ▶ Which optical losses must be mapped backwards from the eye, not just corrected on the panel?
- ▶ Can demura of a million-pixel microdisplay run fast enough for a production line?
Measuring and Correcting MicroLED Display Uniformity
Talk · 25 September 2024
→ See the MicroLED Connect 2024 agenda
Methods to measure subpixel luminance & chromaticity for correction (Demura) & Quality Control for MicroLED displays. This inorganic emissive technology offers many benefits over other display technologies including high brightness, contrast, wide colour gamut, longevity, and high pixel density, improving visual performance in various ambient-light conditions from total darkness to full daylight and from multiple viewing angles. What are the challenges to efficiently control the quality of microLED displays and how to enable display correction?