
Tobias Steinel
Product Manager, Instrument Systems
Tobias Steinel spoke at MicroLED Connect in 2025 and 2026, representing Instrument Systems.
Optical Metrology for MicroLED Displays and Wafers: Optimized Color-Matching Functions for Cross-Technology Product Portfolios
Talk · 16 September 2026
→ See the MicroLED Connect & AR/VR Connect 2026 agenda
MicroLED metrology must combine spectral accuracy with production throughput. Millions of µm-sized emitters require economical testing, while narrow emission bands (10–30 nm FWHM) and emitter wavelength variations amplify camera-filter mismatch with CIE 1931 color-matching functions (CMFs). Observer metamerism limits technology comparability. A high-resolution camera combined with a traceable reference spectroradiometer acquires a spectrum with each image. This enables live, DUT-specific calibration and per-pixel tristimulus calculation for arbitrary CMFs, including CIE 1964, CIE 2006/2015 and any published customer-specific CMF, without hardware changes or repeated measurements. Optimized acquisition and GPU analysis accelerate the system by about 100×, enabling video-rate high throughput display and wafer tests and single-shot characterization of millions of emitters. Chromaticity agrees closely with spectroradiometer references; stepped-kernel filters suppress artefacts at low sampling rates. Fast, accurate and traceable metrology is essential for cost-effective µLED mass production, yield analysis and wide-gamut and AR/VR quality assurance.
▶ Watch video highlights from this talk
- ▶ How do you measure peak wavelength, power and polarization of every VCSEL emitter in an optical interconnect array?
- ▶ Why is microLED pixel compensation harder than OLED, and what must be measured per emitter?
- ▶ Why do displays matched to the same D65 white point look pink to different observers?
- ▶ How does 70 frames per second plus GPU acceleration deliver a 100x metrology speedup for microLEDs?
High accuracy optical metrology for MicroLED displays and wafers
Talk · 25 September 2025
→ See the MicroLED Connect & AR/VR Connect 2025 agenda
High-accuracy, traceable color calibration of imaging light measurement devices (ILMDs) is essential for quality control in modern display manufacturing—particularly for LED-based and, increasingly, for inorganic microLED (µLED) technologies. The narrow spectral bandwidth and relatively large manufacturing tolerances of µLEDs present unique metrological challenges that traditional calibration methods struggle to address. In prior work [1], we introduced advanced calibration strategies designed to accommodate the spectral characteristics of LED-based displays. In this study, we focus on the application of these methods to µLEDs, leveraging real-time calibration directly on the device under test (DUT). This "principle of similarity" ensures traceable, high-accuracy results across a wide range of devices and test patterns. We present measurement results from ILMD-based evaluations of µLED displays and wafers, comparing them to spectroradiometric reference data. The findings highlight the effectiveness of DUT-specific, live calibration approaches in overcoming the spectral variability inherent to µLED technologies. [1] Schanz, R., Fischer, F. and Steinel, T. (2024), 58-3: Impact of Calibration Sources on Accuracy of Chromaticity Measurements of LED based Displays. SID Symposium Digest of Technical Papers, 55: 801-804. https://doi.org/10.1002/sdtp.17649
▶ Watch video highlights from this talk
- ▶ Why does standard colorimeter calibration fail miserably for microLED display metrology?
- ▶ How do you eliminate false luminance artifacts in microLED measurements without buying a million-dollar sensor?
- ▶ Can you fully map 17 million microLEDs on a wafer in under six minutes?